3
HARDWARE CONNECTIONS
The KB3000 can be connected to an IBM101 PC, XT, AT or clone
computer, PS/2 computer, or computer terminal. The following diagram
shows how the KB3000 connects to the computer and standard key-
board or other keyboard peripheral (magnetic stripe reader, scanner,
etc.). When the KB3000 is used in a stand alone configuration then no
connections are made to J5.
NOTE:
Before making any connections it is always advisable to
turn off the computer.
A. Connecting the KB3000 to an IBM101 PC, XT, AT, or Clone
computer’s keyboard port:
1.
Use the supplied interface cable. Plug the 6-pin connector into J2
of the KB3000. Plug the 5-pin connector into the computer’s
keyboard port.
2.
Connect the computer’s keyboard into J5 of the KB3000.
NOTE:
J1 and J6 are not used in this configuration.
To computer
keyboard port
To computer keyboard or
other keyboard wedge devices
Summary of Contents for KB3000
Page 1: ...Model KB3000 Programmable Keypad 176 Programmable Keys USER MANUAL...
Page 25: ......
Page 26: ......
