background image

Legislation and Weee Symbol

 

2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, 
collection, recycling and disposal of electric and electronic devices and their 
components. 

 

The crossed dustbin symbol on the device means that it should not be disposed of 
with other household wastes at the end of its working life. Instead, the device should 
be taken to the waste collection centers for activation of the treatment, collection, 
recycling and disposal procedure.   
To prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it 
responsibly to promote the sustainable reuse of material resources.   
Household users should contact either the retailer where they purchased this 
product, or their local government office, for details of where and how they can take 
this item for environmentally safe recycling.   
Business users should contact their supplier and check the terms and conditions of 
the purchase contract.   
This product should not be mixed with other commercial wastes for disposal.   
 

Package Contents 

Standard Items: 

1.

 

System  2. Driver 

bank 

CD  3. Power 

adapter  4. Power 

cord 

 
Accessory items   

 Part 

Number 

Description 

Quantity 

1  3XCC00000010 

Touch Screen Wipes ,20 x 15mm 

2  3XPP00000010 

SPIRAL WARPPING BANDS SWB-16,L15mm 

SCREW PACK: security screws* 

3 7P0000000030* 

Screw driver 

 
* There are the security screws and a screw driver for replacing the hard drive screws.   
* Customers can replace special the screws to ensure the HDD data security. 

 

4

Summary of Contents for SB-9090




















Reviews: