Logic Digital Controller
User Guide version 3
Page 15 of 31
Out1 Freq Width Gain
EQ1 100Hz 1.4Q 0.0dB
a
b
c
CHANNEL
EDIT
Pressing the edit navigation buttons gives access to the various pages of parameters available
for each channel. The currently selected page is shown in the bottom left hand corner of the
display; this is omitted on some pages where the function is obvious. The screen shows up to
three (normally related) parameters for a given part of the processing functions on a given
channel.
The edit buttons allow you to scroll, in either direction, through the different processing pages
for a given Channel. When you go past the last page, you will be returned to the default page.
The channel buttons allow you to scroll, in either direction, through the input and output
channels, whilst trying to maintain the currently viewed processing block. If the channel you
scroll to does not have the currently viewed processing block, the next one will be shown
instead.
NB. When the unit powers-up, the settings will be the same as those when the unit was last
switched off.
Presets
The device contains a total of forty-five user and Factory Preset
s
. The user cannot overwrite the
basic mono, basic stereo or Factory Preset programs.
Preset Recall
To select an existing preset, press the Recall Button so the indicator above it illuminates. Turn
parameter knob A until the required preset number is shown on the display. Factory Preset
s
are
