MATRIX ZBA7140
User’s manual
EN
Logic Group A/S
Page 11 / 31
6.5 Control of other devices
When using MATRIX ZBA with a light dimmer, it is preferable to use association groups to control it. See section
about Association Groups 1-9.
Example 1: One MATRIX ZBA and an
external light dimmer.
This example illustrates a system with a MATRIX
ZBA device that controls an external light dimmer
with association groups.
In the figure the dimmer is controlled by group 5
(pushbutton 2) in device #5 by sending Multi-
level Switch commands to the dimmer device #2.
Use Association group 3, 5, 7 and 9 for
multilevel switching (dimming) with pushbutton
1, 2, 3 and 4. For relay modules, window control
etc. use the Basic Set Association Groups.
Figure 4: Controlling a light dimmer with pushbutton 2
5 -> 2 Multilevel Switch
2
5
