MATRIX ZBA7140
User’s manual
EN
Logic Group A/S
Page 5 / 31
4
Product description
MATRIX type ZBA7140 (from hereon called MATRIX ZBA) is a multifunction battery wall controller that can be
mounted in a modular wall-box or directly onto the wall. It is compatible with existing FUGA® frames and wall
boxes.
MATRIX ZBA has four configurable pushbuttons that can control other Z-Wave devices through the wireless Z-
Wave network. These buttons can send ‘ON’, ‘OFF’ and ‘DIM’ commands to the associated Z
-Wave devices.
These devices could be light dimmers, blinds, sunscreens, etc.
MATRIX ZBA can also issue scene activation commands that can be used to activate scenes in the Z-Wave
Controller.
MATRIX ZBA has four RGB indicator LEDs, one for each pushbutton, that indicates activation of the pushbutton,
and when MATRIX ZBA is in inclusion or exclusion mode. These indicators can be configured to a desired
indication colour, or they can indicate the battery level when a pushbutton is activated.
MATRIX ZBA is equipped with the newest battery-saving 700-series Z-Wave chip that uses up to 65% less power
and have improved wireless range. This means that the small coin-cell battery can last between 5
–
10 years.
MATRIX ZBA is estimated to a battery lifetime, at normal use, to approximately 5 years.
