USB client
SUB -D 25 extra features via special cable (not included)
- external CRT, Audio out -
3. Power port
After you connect the external monitor to the Video port on the PRM (cable
not included) slide the External Monitor switch to the right position as shown
in the illustration above.
Contact your local help desk or TETRA computer reseller.
Note
When activating external display switch (left or right) the handheld device
reset automatically.
make sure to back up your data.
1.
2.
TPAD User’s Handbook page 41
Chapter 2. Using the Tpad
Conecting devices
Docking Cradle expansion
Monitor
switch Right position
for external display
Connecting
external devices
Activating the monitor or projection panel
1
3
2