ZOOM OMAP35x DevKit
10
QuickStart Guide
2.
Make sure the connector on the bottom of the ETM adapter board aligns correctly
with the connector on the SOM-LV. See Figure 2.3 for connector location.
3.
Press straight down on the ETM adapter board directly over the connectors to
mate the two boards. See Figure 2.4 for final position of the connected ETM
adapter board to the SOM-LV.
Figure 2.4 – ETM Adapter Board Connected to SOM-LV
2.3 Connect the SOM-LV to the Baseboard
The SOM-LV connects to the baseboard via two BTB socket connectors.
1.
Align the SOM-LV over the two connectors farthest in from the edge of the board.
See Figure 2.5. (There is an outline of the SOM-LV on the baseboard silkscreen to
show proper placement.)
