ZOOM OMAP35x DevKit
QuickStart Guide
17
3 Ready for Demo Mode
The OMAP35x Development Kit comes with one or more SD cards, each containing a pre-
built OS image. Booting directly into these SD cards allow you to demonstrate the capabilities
of the development kit for the specific operating system. The following steps will walk you
through the set-up process.
1.
Connect the regulated 5V power supply to the appropriate power adapter for the
location in which you are using the development kit.
Figure 3.1 – Connect Power Supply and Adapter
2.
Plug the power adapter into an electrical outlet and the 5V line output connector
into the power-in connector on the baseboard.
