8
Warranty
This product is warranted to be free from defects in materials or workmanship for a period of one year from the date of purchase.
Logic Rail Technologies
reserves the right to repair or replace a defective product. The product must be returned to
Logic Rail
Technologies
in satisfactory condition. This warranty covers all defects incurred during normal use of this product. This
warranty is void under the following conditions:
1) If damage to the product results from mishandling or abuse.
2) If the product has been altered in any way (e.g. soldering).
3) If the current or voltage limitations of the product have been exceeded.
Requests for warranty service must include a dated proof of purchase, a written description of the problem, and return shipping
and handling ($6.00 inside U.S./$10.00 outside U.S. - U.S. funds only). Except as written above, no other warranty or
guarantee, either expressed or implied by any other person, firm or corporation, applies to this product.
Troubleshooting
If your signal is not reacting properly when a particular photocell is covered or uncovered then you can perform the following
tests. First, perform the photocell setup routine previously described. If one or more of the photocells does not function properly
then you know it/they is/are faulty. If the photocells are determined to be OK then you might have a problem with the
BA
, the
signal, or the wiring between them.
Technical Support
We hope the preceding instructions are sufficient for answering any questions you might have about the installation of this
product. However, technical support is available should you need it. We would ask that you first contact your place of purchase
for assistance. If you still need further assistance then please do not hesitate to contact us. You can reach us via phone, fax, mail
and email; our contact information can be found on the top of page 1.