www.logicav.in
CAUTIONS:
1.Do not do any adjustment without load weight.
2.Ensure the expansion screws are fixed tightly and properly.
3.To avoid any damages, make sure there’s not any obstructions or people that may impact the product when
operate the projector lift.
4.Ensure the projector is installed in the central point to avoid losing the balance.
5.Never operate the product in overloaded statement.
6.Do not stretch hands or other objects into the lifting arm to avoid any injure or accident.
OPERATION CAUTIONS:
Please refer to below procedures to check if the projector lift is out of order.
1.Make sure the power cord connected properly and be with regular power supply.
2.Do not operate it frequently.
3.Let the motor stop for 15 minutes, then turn it on again to check if the motor is in an overheating protection statement. If the
problem still remains unsolved, please contact with us or the dealers for further assistance. Please do not disasssembe or
change the structure by your own.
TROUBLESHOOTING:
We only recommend experience AV installers undertake these procedures.
If the new installation or used projector lift need to be checked, our company should be informed first, the operation should be
started only after approved, or this product is no longer covered under our warranty. Please check the ground protection in
advance before checking to avoid electric shock.
If the projector lift does not work
1.Restart it after 15 minutes o check if it’s in overheating projection statement or not.
2.Check both terminals of the power cord to see if the problem occurs by the power supply.
3.If the voltage is normal, please check if there’re any loose wires or burned fuse occured.
4.When the whole lift need to be disassembled and maintained. Lay the lift flat, disassemble the cover plate with cross
screwdriver, to maintain and repair the electrical or mechanical parts.
