Logicbus TC101A Product User Manual Download

Page: 4 / 4

PRODUCT USER GUIDE

TC101A

NEED HELP?

Device Maintenance

Battery Replacement

Materials: Small Phillips Head Screwdriver and a
Replacement Battery (LTC-7PN)

1. Puncture the center of the back label with the screw

driver and unscrew the enclosure.

2. Remove the battery by pulling it perpendicular to the

circuit board.

3. Insert the new battery into the terminals and verify it

is secure.

4. Screw the enclosure back together securely.

Note:

Be sure not to over tighten the screws or strip the threads.

Recalibration

Recalibration is recommended annually. To send devices
back for calibration, visit

Summary of Contents for TC101A

Page 1: ...ata Logger PRODUCT USER GUIDE To view the full MadgeTech product line visit our website at madgetech com TABLE OF CONTENTS 2 Product Overview 2 Installation Guide 2 Wiring the Data Logger 2 Device Ope...

Page 2: ...wire thermocouples with lead wires Note Be sure to connect the thermocouple with the right polarity as marked on the device case The TC101A ST and TC101A TB have the ability to shield the thermocoupl...

Page 3: ...he device has started logging To stop the device Press and hold the pushbutton for 5 seconds the red LED will flash during the this time The device has stopped logging Downloading Data from a Data Log...

Page 4: ...e screw driver and unscrew the enclosure 2 Remove the battery by pulling it perpendicular to the circuit board 3 Insert the new battery into the terminals and verify it is secure 4 Screw the enclosure...