TYPES OF OPERATIONS
Logicube EchoPlus-
NG User’s Manual
37
5.2.2.2 LBA
The LBA icon will bring up the LBA settings screen. On this
screen, the user can adjust the percentage or the number of
blocks of the drive to hash and where to start the hash.
Users can specify the length (in LBAs) of the drive to be hashed.
By default, the length is set to 100% (whole drive).
Users can also specify where to start the hash. By default, this is
set to 0% (the first LBA of the drive).
5.2.3 Job Info
Job Info allows users to enter information about the job. This is optional and is
not required to start an operation. Information entered here will appear in the
logs. More information on the Job Info screen can be found in
Section 4.3.1
.
5.3 Wipe
This type of operation allows the user to erase, wipe, and/or format a Target
drive. There are three main settings: Secure Erase, Wipe Patterns, and Format.
Secure Erase –
Sends a command to the drive instructing it to perform a secure erase
based on the drive manufacturer’s specifications for the secure erase command.
