TYPES OF OPERATIONS
Logicube EchoPlus-
NG User’s Manual
48
Clone –
A clone task can be started, but no settings can
be changed.
Hash –
A hash task can be started, but no settings can
be changed.
Wipe –
A wipe task can be started, but no settings can
be changed.
Logs –
Since there are no settings or configurations for
this operation, it is not affected by Config Lock.
Statistics –
Since there are no settings or configurations
for this operation, it is not affected by Config Lock.
System Settings –
This entire section cannot be
accessed without the unlock key.
Network Settings –
This entire section cannot be
accessed without the unlock key.
Software Updates –
This entire section cannot be
accessed without the unlock key.
Power Off –
This entire section cannot be accessed
without the unlock key.
The Passwords can be saved into a profile
and loaded each time the EchoPlus-NG is
turned on. See
Section 5.6.1
for more
information on saving and loading a
profile.
Remember the Config Lock Key! If the
EchoPlus-NG is configured to load with
the Config Lock set (enabled) the only
way to delete the Config Lock is to reset
the EchoPlus-NG using the Command Line
Interface (CLI).
5.6.2.2 Forgotten password or config lock key
If the Log File Deletion password or Config Lock key is forgotten,
the EchoPlus-NG will need to be reset using the Command Line
Interface (CLI). See
Section 8.2
for more information on how to
connect to the EchoPlus-NG using the CLI.
Once connected to the CLI:
1.
Login with the username “
it
” (without the quotes) and
the password “
it
” (without the quotes).
