Logicube EchoPlus-
NG User’s Manual
62
8: Remote Operation
8.0 Remote Operation - Introduction
The EchoPlus-NG comes with two gigabit network connections in the back of the unit.
Connecting the EchoPlus-NG to a network allows remote access to the EchoPlus-NG from any
computer within the same network.
The EchoPlus-NG is configured for DHCP by default. See
Section 8.6
for instructions on how to
configure the EchoPlus-NG with a Static IP address.
The EchoPlus-NG is setup with a Zero Configuration Network (Zeroconf). There are two ways to
access the EchoPlus-NG:
Web interface – A graphical interface using an Internet browser where the screens are
shown exactly the way they appear on the EchoPlus-NG
Command Line Interface (CLI) – A text only command line interface that can be accessed
one of two ways:
i.
Telnet (via a network connection)
ii.
SSH (Secure Shell via a network connection)
BROWSER COMPATIBILITY
:
Google Chrome and Mozilla Firefox are
recommended. Other browsers may not display the Graphical User Interface (GUI)
properly.
8.1 Web Interface
Using a web browser, go to the IP address or the name of the EchoPlus-NG with its serial
number. Both IP address and serial number can be found by going to the
Statistics
screen on the
EchoPlus-NG. For example, browse to
http://192.168.1.100
or
http://echo-XXXXXX
where XXXXX
is the 6-digit serial number of the EchoPlus-NG. The EchoPlus-NG’s web interface will appear on
the browser screen. All screens and operations available on the EchoPlus-NG will be available on
the browser.
On some browsers or Operating Systems, the EchoPlus-NG will need to be
accessed by browsing to http://echo-XXXXXX.local.
The EchoPlus-NG can be controlled by clicking on the icons appearing on the browser window.
