INTRODUCTION
Logicube OmniWIPE-
2™ User’s Manual
2
Features
Wipes any IDE (Parallel ATA) or SATA (Serial
ATA) drives.
Data erasure rates in excess of 4.0 GB/min.
Hard disk drives can be of different sizes, makes
and models.
Capable of conforming to Department of
Defense (DoD) specification data wiping.
Capable of performing a standard WipeOut
operation as well as a high-speed Security
Erase.
Using this guide
This user guide is made up of 7 sections:
Introduction
Getting Started (Fast Start)
Wiping Modes and Settings
CompactFlash Card
Software Loading Instructions
Frequently Asked Questions
Index
Please read Section 1.
Introduction
, and Section 2.
Getting Started
before attempting a drive wiping
session. It is recommended that you practice with a
scratch drive to fully appreciate all of the features.
System description
The complete Logicube OmniWIPE-2 system
includes the following:
The Logicube OmniWIPE-2
Three (3) 5” 80-conductor flat ribbon cables
Three (3)
5” drive power cables
Three (3) 5” Serial ATA cables
An external 12V DC
– 5.5Amp power supply
with removable AC power cord
A CD-ROM containing:
