GETTING STARTED
16
Logicube SuperSonix User’s Manual
“Navigating Menu Options”
•
- Tap the START icon to begin a cloning
operation using the current settings.
•
- Tap the STOP icon in mid operation to
abort the process.
•
-
Tap the BACK icon from any sub
menu to return to the previous menu screen(s)
•
- Tap the MAIN icon any time it is
available to return to the main screen.
•
- Tap the OK icon to return to the main
screen or to go back to a cloning process set up
screen.
•
&
- Tap the respective YES or NO
icons in response to any questions that the
Supersonix needs you to answer.
Alphanumeric Keystroke Entry
The electronic alphanumeric keyboard is used for
labeling drive partitions in Master Manager Mode,
entering passwords and other functions.
Tapping
ALT
on the electronic keyboard at any time
causes the display to switch between:
(0,1,2,3,4,5,6,7,8 9, ! @ . % &*? _-), (A-Z in capital
letters) and (a-z in lower case letters)
NOTE
: Drive partition labels must be 11 characters or
less.
Indicator Lights
The
POWER
indicator light remains on while the
Logicube SuperSonix is receiving power.
The
STATUS
indicator is lit during cloning operations
and any operation that accesses the Master or Target
drive. It will flash as data is transferred from one drive
to the other.
The
ERROR
light will turn on if a problem is
encountered during cloning or any other operation. If
this occurs, check the screen for an error message
and instructions on what to do next.
