CLONING MODES AND SETTINGS
30
Logicube SuperSonix User’s Manual
that reads
Clone Successful! Drive cloned
successfully!
along with the maximum speed that
the transfer process obtained. Tap and hold down
the
Stop
icon to stop and cancel the cloning
process.
Selective Partitions™ Mode
Selective Partitions is the most elaborate and
flexible cloning mode. It provides the highest level
of control over the cloning process, allowing you to
individually select one or multiple Master drive
partitions. It also allows you to choose a unique
copy method for each.
NOTE
: Not all copy methods are available for all
partition types.
Copy Methods within Selective Partitions Mode
Clever
– Allows the Logicube SuperSonix to
determine the best (and usually fastest) way to
clone a selected partition. It works with FAT16,
FAT32 and NTFS partitions.
Mirror
–
This setting clones the full contents of the
selected partition without any partition scaling. (This
setting is similar to 100% Clone mode, which
mirrors the entire Master drive.)
NOTE
: Partition Mirror is available for any partition
type, and is the only method available to partitions
that are unrecognized by CleverCopy mode.
Keep Size
–
Uses the CleverCopy algorithm but
maintains the partition size during the clone.
Defragment
– Using an advanced defragmentation
algorithm, this copy method creates a Target
partition with contiguous files and no gaps. This
method is only available on partitions with FAT16
and FAT32 file systems.
NOTE
: The Logicube SuperSonix will resort to
defragment mode if the given partition is FAT16 and
a cluster size change is required to create a valid
Target partition.
Convert
– Will convert the selected partition from
FAT16 to FAT32 format on the fly. This method is
available for FAT16 partitions only.
