OPTIONAL PERIPHERALS
Logicube SuperSonix User’s Manual
59
1. Tap the SAS Hashing icon
and two
icons like the ones in Fig. 18 will be
displayed.
Figure 18.
2. Select the Hash SAS Master icon to
calculate and store the MD5 hash value of
the Master drive. To change the number of
sectors that the calculation will be base
upon; Tap the Total Sector: Whole Drive
icon shown in Fig.19.
Figure 19.
3. This will bring up a touchpad that will allow
you to enter the maximum sector value for
the calculation. Once value is entered press
OK.
4. Tap
(Start) to begin the calculation.
5. To verify the SAS target matches the Master
drive tap the Verify SAS Target icon.
Figure 20.
