USB AND FIREWIRE PORTS
72
Logicube SuperSonix User’s Manual
NOTE:
To the right of each partition name, you will see a
two-character designator for the partition type:
• 16 - FAT16 partition
• 32 - FAT32 partition
• NT - NTFS partition
• CQ - Compaq partition
• DE - Dell utility partition
• PH – Phoenix Recovery partition
• ?? - Unknown partition
8. Choose a partition to clone and use the
Select button to toggle between the different
copying methods available. Repeat this step
for each partition you wish to clone.
NOTE:
If no copy method is selected, the partition will
not be cloned.
9. Click the START/STOP button (Clone
Now!). A confirmation screen will appear
showing the percentage selected and the
direction. Turbo->PC will copy from the
SuperSonix to the computer, while PC-
>Turbo will copy from the computer to the
SuperSonix. If you need to change any
setting, click the BACK button. Otherwise,
click the SELECT button to begin the cloning
process.
10. A confirmation screen will appear stating:
Continuing will overwrite your Turbo drive
(or PC local drive depending on which
direction was chosen). Are you sure?
11. Click the SELECT button for <Yes> or click
the BACK button for <No>.
12. The USB Cloning Software will notify you
when the cloning process has completed.
Click the BACK button to return to the main
menu.
Optional Preference Settings
In addition the different cloning modes, there are
preference settings that can be used to adjust the
behavior of the cloning operation. Each of these
preference settings is accessible through the
Settings menu, which can viewed at any time from
anywhere in the menu system by clicking the SET
button.
NOTE
: Not all preference settings are available in every
cloning mode.
