TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual
55
OPTIONAL:
Tap
Role
to select the role for this repository. By default, it is set to “Both”
Source (Master) and Destination (Target). Tap
OK
when finished.
To delete a repository, tap the
delete
icon. A confirmation screen will appear. Tap
Yes
to
permanently delete the repository from the list.
In order for a repository to remain configured when the unit
is turned off, the changes must be saved and loaded to a
profile. Details on profiles can be found in
5.8.2 iSCSI
This screen allows a user to add a repository using the iSCSI protocol.
To add a repository using the iSCSI protocol, an iSCSI Target must be setup on the
remote system. Since networks are configured differently, a Systems Administrator or
Network Administrator may be needed to set up the iSCSI protocol.
Once the iSCSI Target has been setup, click
Settings
.
Input the iSCSI target portal, username and password. Tap the
OK
icon when finished.
Tap
Role
and input the role for the iSCSI server then tap
OK
.
