Logicube ZClone™ User’s Manual
13
4. Modes of Operation
Modes of Operation
There are six (6) modes of operation available on the ZClone. The left side of the screen shows
the different modes that can be set.
CLONE –
Performs a clone to and from drives and/or images (drive to drive, image to drive,
or drive to image).
WIPE –
This mode is used to wipe drives. Drives can be wiped using Secure Erase, DoD, or a
custom wipe setting.
HASH –
This mode will perform a SHA1, SHA-256, or MD5 hash of a drive.
LOGS –
This mode will display logs of each task that has been performed on the ZClone.
ZCLONE STATISTICS –
This will display information about the ZClone including the current
software installed.
SYSTEM SETTINGS –
This mode allows changes to the system settings on the ZClone which
includes restart options, software updates, and configuring and viewing user
profiles/configurations.
NOTE:
Configuring/viewing user profiles/configurations will be available via the user
interface in a future update. Managing repositories (not shown on Graphical User
Interface (GUI)) and configuring/viewing user profiles can be performed by using the
Command Line Interface (CLI). The CLI is further explained in Chapter 7: Remote
Operation and Chapter 8: Command Line Interface Menus.
Clone
This mode allows you to clone one drive to one or more drives, one drive to
an image, or an image to one or more drives. There are different cloning
methods and settings to choose from. These selections should be
performed in order from left to right.
There are four selections when performing a Clone: