MODES OF OPERATION
Logicube ZClone™ User’s Manual
14
Mode
–
Tap this icon to choose between the
following cloning modes:
•
DRIVE TO DRIVE – Allows cloning from one Master
drive to one or more Target drives.
•
IMAGE TO DRIVE – Allows cloning from one image
file to one or more Target drives.
•
DRIVE TO IMAGE – Allows cloning from one Master
drive to one image drive.
Master
–
Tap this icon to select which drive or
image file will be used as the Master drive or image. When
‘DRIVE TO DRIVE’ or ‘DRIVE TO IMAGE’ is chosen from the
previous selection, this will show the different drives
connected to the ZClone. When ‘IMAGE TO DRIVE’ is chosen
from the previous selection, this will show the repository
screen which contains the different images located on the
ZClone’s repository drive.
Note:
If a drive has been selected for a previous task, it will
show as unavailable for other additional tasks.
Selecting Master drives or images
If ‘DRIVE TO DRIVE’ or ‘DRIVE TO IMAGE’ was chosen as the
mode the following screen will appear. This will allow you to