MODES OF OPERATION
Logicube ZClone™ User’s Manual
20
HPA/DCO
–
Tap this to bring up the HPA/DCO
window.
Select
YES
to unlock and copy a Host Protected
Area (HPA) or Device Configuration Overlay (DCO). Some PC
manufacturers will employ a utility that creates a HPA or
DCO configuration on a hard drive. These configurations are
designed to change drive characteristics such as drive
capacity, speed and other settings as they are reported to
the PC BIOS.
HPA
– Host Protected Area can limit the size of a hard
drive, but it can also change many other settings such as
speed and S.M.A.R.T. status.
DCO
– Device Configuration Overlay limits the size of a
drive only. For example, a 160GB drive can be made to look
like a 100GB drive to a PC.
•
VERIFICATION METHOD –
Select this to choose a
verification method. SHA-1 and SHA-256 are recommended.
There are 4 different options:
NONE (default) –
No verification.
SHA-1 –
Select this
to verify the Target drives using the
SHA-1 algorithm.
SHA-256 –
Select this to verify the Target drives using
the SHA-256 algorithm.
MD5 –
Select this to verify the Target drives using the
MD5 algorithm.
