MODES OF OPERATION
Logicube ZClone™ User’s Manual
21
Target
–
Tap this icon to select which drive(s)
or image file will be used as the Target drive or image.
When ‘DRIVE TO DRIVE’ or ‘IMAGE TO DRIVE’ is chosen
from the Mode settings, this will show the different drives
connected to the ZClone. When ‘DRIVE TO IMAGE’ is chosen
from the Mode settings, this will show the repository screen
which contains the different images located on the ZClone’s
repository drive.
Note:
If a drive has been selected for a previous task, it will
show as unavailable for other additional tasks.
Selecting Target drives or images
If ‘DRIVE TO DRIVE’ or ‘IMAGE TO DRIVE’ was chosen as the
mode the following screen will appear. This will allow you to
select one or more Targets. It will display all available drives
that are connected. If a drive has been selected for a
different task, it will be greyed out and cannot be selected.
You can also tap the ‘MORE INFO’ icon to see more
information on the drive. The drive details window will
appear showing information about the drive such as the
which bay it is connected to, the model, size, cylinders,
heads, sectors, etc.