REMOTE OPERATION
Logicube ZClone™ User’s Manual
40
5.
In the next screen, set Bits Per Second: 115200, Data Bits: 8, Parity:
None, Stop Bits: 1 and Flow Control: None. Click
OK
when finished.
6.
The ZClone CLI should appear. Login with the username “
it
” (without
the quotes) and the password “
it
” (without the quotes).\
7.
You should be logged in and see the following prompt in the Telnet
window:
8.
You can now control and manage the ZClone remotely via the command
line interface. The available commands are listed in Chapter 8:
Command Line Interface Menus