OPTIONAL ADAPTERS
Logicube ZClone™ User’s Manual
46
NOTE:
The SATA/SAS Extension Adapter is required when using this adapter
and can only be used on Drive bays A1 through A4 and B1 through B4).
mSATA (mini-SATA) Drives
mSATA (mini-SATA) drives can be connected using the adapter shown
above. This mSATA adapter connects to the SAS/SATA Extension Adapter.
NOTE:
The SATA/SAS Extension Adapter is required when using this adapter
and can only be used on Drive bays A1 through A4 and B1 through B4).
eSATA Drives
eSATA drives can be connected using the SAS/SATA Extension Adapter. The
SAS/SATA cable included with the Extension Adapter will need to be
removed and replaced with the eSATA cable. Connect the SATA end of the
eSATA cable to the Extension Adapter and connect the eSATA end of the
cable to the eSATA drive. Power to the eSATA drive should come with the
drive (typically some type of external AC adapter or power cable).
NOTE:
The SATA/SAS Extension Adapter is required when using this adapter
and can only be used on Drive bays A1 through A4 and B1 through B4).