QUICK START
Logicube ZX-
Tower™ User’s Manual
12
5.
Tap the
Passes
icon to edit the number of passes and what gets written
on each pass.
If
Custom
was selected, at least one pass must be edited and
chosen. If
DoD
was selected, a 7
th
pass value must be
edited/entered.
6.
Optional:
Tap to set the Job Name, Job ID, Operator ID, Other
ID, or Job Notes.
The ZX-T will convert any non-POSIX portable characters used in
Job Name
field to underscores “_“ when creating the log or file
names.
POSIX portable characters are:
Uppercase A to Z
Period (.)
Lowercase a to z
Underscore (_)
Numbers 0 to 9
Hyphen/Dash (-)
7.
Tap the
icon to start the wipe task. The ZX-T will perform a
Secure Erase first (if selected), then a Wipe Pattern (if selected).
8.
When finished, the status will show “COMPLETED”. At this point, it is
recommended to click Reset Task to reset the task, and also to delete
the task in order for the drive bays to be properly reset and not show as
being used or assigned for other tasks to be configured.
3.3 Task Macro
This operation allows up to five (5) macros that can be set. Each macro can run
up to nine (9) tasks sequentially (one after another). For example, to perform
a Wipe Patterns wipe with more than 7 passes, a macro can be set to perform
the Wipe 1 task with 7 passes followed by the Wipe 2 task with another 7
passes.
Summary of Contents for ZX-Tower
Page 11: ......
