TYPES OF OPERATIONS
Logicube ZX-
Tower™ User’s Manual
26
5.0.2 Wipe
This type of operation allows the user to erase and/or wipe
one or more Target drives. There are two main settings:
Secure Erase and Wipe Patterns.
Details on the different screens found in the Wipe operation can be found in
Chapter 4: Wipe
.
5.0.3 Task Macro
This operation allows up to five (5) macros that can be set.
Each macro can run up to nine (9) tasks sequentially (one after
another). For example, to perform a Wipe Patterns wipe with
more than 7 passes, a macro can be set to perform the Wipe 1
task with 7 passes followed by the Wipe 2 task with another 7 passes.
Each of the five macros can be set by tapping on the Macro number on the top
of the screen. Each task or operation must be set up before setting up the
macro. For example, to set up a Task Macro that will perform a Wipe Patterns
wipe with 14 passes, users must first set up two wipe tasks, each with the
maximum 7 passes. Once both Wipe 1 and Wipe 2 tasks have been set up, the
Task Macro can be created.
Summary of Contents for ZX-Tower
Page 11: ......
