34
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
PROBLEM
SOLUTION
No power.
• Ensure the car power adapter or the mains adapter is connected.
• Make sure that the unit is turned on.
• Make sure that you select ON mode.
The remote control
does not function.
• Use the remote control near the unit.
• Point the remote control at the remote control sensor on the
unit.
• Replace the battery in the remote control with a new one.
• Make sure the plastic sheet has been removed from the remote
control.
• Remove any obstacles between the remote control and the unit.
Very little or no
sound is coming
from a DVD.
• Make sure the unit is not paused. Press the button.
• Make sure the unit is not in fast-forward or fast-reverse mode.
Press the button.
• Make sure the AUDIO/VIDEO input/output connections are
correct.
• The DTS DVD cannot be decoded to have speaker output. Press
the AUDIO button on the remote control repeatedly to switch to
other languages recorded on the disc.
• The unit has overheated. Shut it off for 30 minutes to allow it to
cool down.
No picture.
• The region number of the disc does not match the region
number of this unit.
The picture is not
clear.
• The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Please adjust the display’s brightness, contrast, hue and colour
using the MENU button on the unit or MODE button on the
remote control.
Loud hum or noise
is heard.
• The plugs and sockets are dirty. Wipe them with a cloth slightly
moistened with alcohol.
• Clean the disc.
L10SPDV13_IB_161013_will.indd 34
13/10/2016 10:09 AM
