19
Disc Type
DVD-VIDEO
Region code
Region Code
Both the DVD player and the discs are coded by
region. These regional codes must match in order
to play the disc. If the codes do not match, the disc
will not play.
The Region Number for this DVD player is
described at the bottom of the DVD player.
Turning On the DVD Player
1. Slide the
/STANDBY/ON
switch on the unit
to
ON
position on the left panel to turn the DVD
player on. The LED Indicator lights up green.
2. The
LOGIK DVD
logo (start-up picture) will appear
on the screen and the unit will start loading the
disc automatically (if available).
3. After use, slide the
/STANDBY/ON
switch on the
unit to
STANDBY
position to turn the DVD player
off.
Remove the disc from the unit after the disc has stopped spinning completely.
Basic Playback
This instruction manual explains the basic instructions for operating this unit. Some DVDs
are produced in a manner that allows for specific or limited operation during playback.
Therefore, this unit may not respond to all operating commands.
This is not a defect
.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
“ ” may appear on the screen during operation. “ ” means that the desired operation is not
permitted by the unit or disc.
Basic DVD Playback
1. Slide the
/STANDBY/ON
switch to the
ON
position on the unit.
2. Open the Disc Door.
3. Hold the disc by its sides and carefully place onto
the disc holder with the label side facing to the
front panel. Gently push the disc down until you
hear a “click” sound.
4. Close the Disc Door. The unit starts playback if the
disc does not have any menus recorded on it. If the
disc has one or more titles recorded on it, a menu
screen will appear on the screen.
L12PDVD14_IB_140509_will.indd 19
9/5/14 6:06 PM
