GB-1
GB-2
GB-3
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
• The Main Unit
• The Water Hose (P.N.: 202725490014)
• The Instruction Manual (P.N.: L16DHW10-002)
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
PRODUCT OVERVIEW
CONTINUOUS DRAINING
Water can be automatically emptied into a
floor drain by attaching the unit with a water
hose (12mm).
• Remove the rubber plug from the back of
the unit.
• Insert the water hose into the unit from the
drain outlet in the back of the unit as shown.
Lead the water hose to a suitable drainage
facility.
CLEANING & MAINTENANCE
Maintenance of your air filter
The air filter located inside the air inlet of the unit collects dust contained in the
air. The build up of dust reduces the efficiency of the unit. To prevent the dust
from clogging up the unit always use it with the air filter in place.
Always clean the air filter every 2 weeks. If the unit operates in a dusty
atmosphere clean the air filter more often.
• To remove the filter. Remove the water tank, pull
down the plastic lip at the bottom of the vents as
shown.
• Clean the air filter with a vacuum cleaner. lf the air
filter is very dirty, you can wash it in warm water
(never use hot or soapy water). Make sure that the air
filter is refitted correctly to the unit. Do not bend the
filter and ensure it is fitted before operating the unit.
Cleaning the unit
• Clean the unit by using a damp sponge, and dry it with a clean, soft cloth.
• Never use alcohol or any product containing solvents.
• Do not immerse the unit in water.
HINTS & TIPS
BEFORE USE
1. Place on a stable, flat floor. If the floor surface is not even:
• Vibration and noise will occur.
• Water may leak from the water tank
2. Make sure the air inlet and air outlet openings are clear and free from blockage.
START OPERATION
1. Connect to the mains socket.
2. Press the
ON/OFF button.
3. Press the
ON/OFF
button to turn the unit off.
SUITABLE FOR USE IN
• Bedrooms
• Studies
• Cellars / Basements
• Kitchens
• Storage rooms
• Libraries
• Galleries
• Computer rooms
Protects moisture sensitive items, such as :
• Musical instruments
• Cameras
• Computers
Benefits:
• Prevents clothes and leather products from moulding.
• Dehumidifies flooring and carpets.
• Prevents ceiling and windows from condensation.
• To obtain best results, try to avoid opening and closing windows and doors.
WATER TANK FULL
When the water tank is full, the
WATER FULL
indicator will illuminate and the unit
will automatically stop operating. Turn off the unit and remove the water tank. Empty
the water and then refit the water tank back to the unit. Turn the unit on again and
continue operation.
The unit must stand upright for at least 2 hours prior to use.
If the unit has been switched off and needs to be switched on again
quickly,allow approximately three minutes for the correct operation to
resume.
When the hose is not being used, remove the hose from the drain
outlet. The hose level must be lower than the drain outlet, see
diagrams below.
Air Intake
Water Tank
Water Level Window
Water Hose
Air Filter
(behind the air intake)
POWER
WATER FULL
Front View
Control Panel
1
3
2
Control Panel
Mains Cable Band
Air Outlet
Handle
Drain Hose Outlet
Rubber Plug
Rear View
Mains Cable
Power Indicator :
Illuminates when the unit is in operation.
Water Full Indicator:
Illuminates when the water tank is full or not in place.
ON/OFF Button:
Press to turn the unit on and off.
1
3
2
Water
Hose
Rubber
Plug
Drain
Outlet
Empty the water tank. Refit the water tank.
The
WATER FULL indicator
illuminates.
Clean the air filter. Make sure that the air inlet
and the air outlet are not obstructed.
Dehumidifying function
does not work.
Ensure the unit is on a stable flat surface.
Clean the air filter.
Excessive noise.
Clean the air filter.
No air coming out from the
air outlet.
Problems
Solutions
C
M
Y
CM
MY
CY
CMY
K
L16DHW10_IB_final110617.pdf 2 17/06/2011 11:27 AM
