9
Power Source
Battery Power
1. Open the battery compartment
cover at the bottom of the CD
player.
2. Insert two alkaline batteries, size
“AA”; install the battery correctly
by following the polarity (+ and
–) indications in the battery
compartment.
3. Close the battery compartment
cover.
When to Replace the Batteries
When the batteries are becoming flat, the “ “ indicator flashes in the LCD
display; replace all the batteries with new alkaline ones.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery
leakage, which could cause personal injury or damage to property.
• Install the batteries correctly by following the polarity (+ and –)
indications in the battery compartment.
• Use only the types of the batteries which are indicated in this manual.
• When the batteries are exhausted, the CD player will not function.
Replace both batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different
types of batteries.
• Do not dispose of the used batteries as domestic waste. Dispose of them
in accordance with local regulations.
• If you are not going to use the unit for a long time, remove the batteries
to avoid damage from battery leakage and corrosion.
• Risk of explosion if battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
• A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
L1PERCD20_IB_Final200410.indd 9
14/04/2020 11:12
