GB
24
First Time Use
Inspect the iron carefully.
Check that the voltage marked on the rating matches your mains voltage.
Remove any protective film from the soleplate. Polish the soleplate lightly
with a clean soft cloth to remove any residues.
Place the iron on the ironing board or a flat rigid surface.
Switching Off the Iron
To prevent water leakage, set to the far
side of the Steam Control to prevent
water leakage from the soleplate.
When switching off the iron, set the Steam
Control to
, also turn the Temperature
Dial to 0 position, then unplug the iron
from the mains socket.
Maintaining the finish of the iron’s soleplate is essential. Keep the
soleplate smooth: do not scratch it on metal objects (e.g. the edge
of the ironing board, buttons, zippers, etc.) as these may impair
performance.
Set to the
position
L200IR17E_IB_5L_RC_191011_grace.indb 24
11/10/2019 1:59 PM
