8
• Do not turn the iron upside down, there may be hot water in
the water tank.
• Use this iron only with a purpose-built ironing board.
• Observe all ironing instructions and ironing temperature
dot settings given by the garment manufacturer. These are
normally on a label or labels inside the garment.
• If the mains cable is damaged it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in
order to avoid a hazard.
• The iron must not be left unattended while it is connected to
the mains socket.
• Always ensure the water filling does not exceed the max mark.
• Always unplug the iron when refilling the water reservoir.
• The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
• Make sure the unit is earthed properly during use. Do not
use the iron with any extension sockets. If in doubt, contact a
qualified electrician.
L200IR17E_IB_5L_RC_191011_grace.indb 8
11/10/2019 1:59 PM