GB-23
Oper
ating I
nstruc
tions
Delay Start Cooking (with Multi-Stage)
1. Press the
Pre-set
pad once and the LED display will
show : 0.
2. Press the
Numeric pads
to enter the starting time
(press 10-min once, 1-min for 3 times and then
10-second for 3 times). The LED display will show
13:30
.
NOTE:
In this mode, the
Minute
pads will be used as
hour pads. The
Second
pads will be used as
minute pads.
ATTENTION:
Do not press the
start
button at this point.
3. Press the
Defrost By Speed
pad to initiate the
multi-stage cooking with defrost as the first stage.
The LED display will show
.
4. Press the
Numeric pads
to enter the defrosting
time (press 1 minute for 5 times) until the LED
display shows
5:00
.
5. Press the
Power
pad once and the LED display will
show
P10
. Press
Power
pad twice to change the
microwave power level to
P8
. Press the
Micro.
pad
to set the cooking time.
6. Press the
Numeric pads
to enter the cooking time
(press 1 minute for 7 times) until the LED display
shows
7:00
.
7. Press the
Memory
pad once.
8. Press the
Grill
pad once and the LED display will
show
.
8
10
1
2, 4,
6, 9
3
7
5
For
Delay Start Cooking (integrated with Multi-Stage Cooking)
, follow the steps below. The setting
must be set within next 12 hours.
For instance: The current time is 12 o’clock (noon) and you want to time defrost the food for 5 minutes,
then to cook it with 80% microwave power for 7 minutes and finally to grill it for 4 minutes in 1 hour
and 30 minutes time.
9. Press the
Numeric pads
to enter the grilling time (press 1 minute for 4 times) until the LED
display shows
4:00
.
10. Press the
Start
pad to complete the setting, the will flash. The microwave will sound
when the count down reaches the starting time and cooking will start automatically.
NOTE:
Child lock is not available under this program. Press
Cancel
to clear setting.
Logik L25GB10_IB_GB_100203.indd 23
2/3/10 2:21 PM
