Interference
Do not place the unit on or near
appliances which may cause
electromagnetic interference. If you do,
it may adversely affect the operating
performance of the unit, and cause a
distorted picture or sound.
Standby
The button on the remote control
does not switch off the unit completely.
The unit will continue to draw electricity
from the mains supply while in standby.
In the interests of safety and to avoid
unnecessary energy consumption,
never leave the unit in standby while
unattended for long periods of time, e.g.
overnight, while on holiday or while out
of the house. Switch it off and disconnect
the mains adapter from the mains socket.
Batteries
Batteries used in the remote control for
this unit are easily swallowed by young
children and this is dangerous.
Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote
control. Seek medical advice if you
believe a cell has been swallowed.
Please dispose of batteries correctly by
following the guidance in this manual.
Supervision
Children should be supervised to ensure
that they do not play with the unit and
the remote control.
Never let anyone especially children
push anything into the holes, slots or any
other openings in the case - this could
result in a fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol,
within an equilateral
triangle, is intended to
alert the user to the
presence of uninsulated
“dangerous voltage”
within the unit’s
enclosure that may be of
sufficient magnitude to
constitute a risk of
electric shock.
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
manual accompanying
the unit.
Service
To reduce the risk of electric shock, do
not remove screws. The unit does not
contain any user-serviceable parts.
Please leave all maintenance work to
qualified personnel.
Do not open any fixed covers as this may
expose dangerous voltages.
Maintenance
Ensure to unplug the unit from the mains
socket before cleaning.
Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
Do not use liquids to clean the unit.
39
L2STB11_IB_110608_Annie.indd 39
11年6月8日 下午3:32
