10
Removing the Insulating Strip from the Remote Control
Remove the insulating mylar strip from the battery
if the battery is being used for the first time� It
is located at the bottom backside of the remote
control�
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery�
1� Slide and hold the battery release tab in the
direction of the arrow�
2� Pull out the battery holder and remove the old
battery�
3� Replace with a new one battery�
4� Insert the battery holder back into the remote
control�
L7SLIDE11_IB_110322.indd 10
23/03/2011 2:11 PM