29
Hints and Tips
If a problem does occur, it may often be due to something very minor� The following table
contains various tips�
Menu
Description
No power�
•
Ensure the mains adapter is connected�
•
Make sure that the unit is turned on�
•
Make sure that you select ON mode�
•
Make sure the battery is charged up on the DVD player�
The remote
control does
not function�
•
Use the remote control near the unit�
•
Point the remote control at the remote sensor on the unit�
•
Replace the battery in the remote control with a new one�
•
Make sure the plastic sheet has been removed from the remote
control�
•
Remove any obstacles between the remote control and the unit�
Very little or
no sound is
coming from a
DVD�
•
Make sure the unit is not paused� Press the
OK
button on the unit or
the button on the remote control�
•
Make sure the unit is not in fast-forward or fast-reverse mode� Press
the
OK
button on the unit or the button on the remote control�
•
Make sure the AUDIO/VIDEO input/output connections are correct�
•
This unit does not support DTS audio decoding system� Press the
AUDIO/ANGLE
button on the remote control to change the audio
setting to 2-Channel Analogue mode�
•
The unit has overheated� Shut it off for 30 minutes to allow it to cool
down�
•
The volume control is too low� Increase the volume�
No picture�
•
The region number of the disc doesn’t match the region number of
this unit�
The picture is
not clear�
•
The DVD is dirty� Gently clean the disc�
•
The disc is scratched�
•
Please adjust the LCD display brightness (see Video setting on page
26)�
Loud hum or
noise is heard�
•
The plugs and sockets are dirty� Wipe them with a cloth slightly
moistened with alcohol�
•
Clean the disc�
•
The disc is scratched or the file is corrupt�
L7SLIDE11_IB_110322.indd 29
23/03/2011 2:11 PM
