Logik L8W5D20, Instruction & Installation Manual

20

Hints and Tips

Issues

Solutions

Buttons don’t work.

•  Child lock is activated. Deactivate the child lock function.
•  The machine is operating a programme.
•  The 

Programme Dial

 was turned to a different programme.

Door doesn’t open.

•  Door lock may be active.
•  The water temperature or level could be too high.

If you start a wrong 

programme accidentally.

Turn the dial to OFF. Re-select the programme, spin speed and 

optional functions, and then press the 

Start / Pause

 button. 

(Note: We suggest that you do not change the programme after 

the machine has been running for 3 minutes.)

Unusual odour.

•  Rubber parts and the motors may give off a smell when you 

first start using the machine, but this goes away over time.

•  You should wash the drum once a month.

You can’t see any water.

This is normal: The water level is below the window.

There’s no water going 

into the machine.

•  The water tap might be turned off.
•  The water hose or water-supply hose may be frozen.
•  Your water supply may be disrupted.
•  The water-supply valve filter may be clogged.

There’s only a small 

amount of water.

•  If you have paused the programme and you restart, the 

machine may drain some water.

•  Don’t pour water in through the door.

Water adds up during 

washing.

This is normal: water is supplied automatically as the level lowers, 

and with heavy loads the water may fill up repeatedly.

The machine does not 

spin.

If a small load is in the machine, it may be detected as an 

unbalanced load and may stop spinning after a number of 

attempts. Make sure to add more clothes for the machine to spin 

properly.

There’s no water going 

into the machine during 

rinse operation.

Before rinsing, the machine spins to drain water remaining from 

the wash. The water will fill up after that.

During the spin-dry, the 

drum stops and rotates 

several times.

This is normal. The machine has detected an unbalanced load 

and is trying to correct it. Make sure to add more clothes for

the machine to spin properly.

Foam and water remain in 

the door or door seal.

Although foam and water may remain, it does not have any 

influence on the performance of a rinse.

Spin starting is repeated.

This is normal. Although spin starting may be repeated, it is a 

function made to spin quietly.

L8W5D20_IB_Final200723.indd   20

L8W5D20_IB_Final200723.indd   20

23/7/2020   3:45 PM

23/7/2020   3:45 PM