10
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the direction
of the arrow. If you are having difficulty with the tab,
use a paperclip to help squeeze the tab.
2. Pull out the battery holder and remove the old
battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote control.
Handling the Battery
•
Improper or incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.
•
Install the battery correctly by following the polarity (+ and –) indications in the battery
compartment.
•
When the battery is exhausted, the remote control will not function.
•
Only use the battery type indicated in this manual.
Removing the Insulating Strips from the
Remote Controls
Remove the insulating mylar strips from the batteries
if the batteries are being used for the first time. The
plastic strip tabs are located at the bottom rear side of
the remote controls.
L9DUALM12_IB_121109_Michelle.indd 10
09/11/2012 11:05 AM
Summary of Contents for L9DUALM12
