18
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following
table contains various tips.
Problem
Solution
No Sound
Adjust the volume control, it may not be turned up.
The mute function may be active, press the SNOOZE/
MUTE button to disable the function.
Static Sound
Signal reception is too low. Adjust the aerial or move the
unit to a stronger signal location.
Sound is distorted
Volume is too high. Adjust the volume control.
Desired station not
found
Weak signal. Use the Manual Tune function.
The display shows
“Signal N/A”
No DAB coverage in your area or poor reception. Adjust
the position of the aerial. Fully extend the DAB/FM aerial.
The display is blank
This may occur if the broadcaster changes the label of a
service or removes a label while tuned. The unit will try
to retune or perform a scan.
Poor FM reception
Make sure the DAB/FM aerial wire is fully extended.
Electrical interference in your home can cause poor
reception. Move the unit away from them (especially
those with motors and transformers).
Maintenance
Cleaning the Unit
Ensure to unplug the unit from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
If any anomalies are encountered, unplug the unit from
the mains socket and reconnect again.
LDABCR11_IB_110705_Zell.indd 18
05/07/2011 10:20 AM