8. Tilt the unit carefully. 2 people are required to
tilt the unit during the door reversing process.
Unscrew
Screw
9. Remove the screws and bottom hinge. Then
remove the adjustable feet from both side
and reattach them to the opposite side.
10. Place the freezer door back on.
11. After replacing the freezer door, screw the
middle hinge back onto the opposite side of
the unit.
Screw
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before finally
tightening the hinge.
12. Place the fridge door back on. Ensure the
fridge door is aligned horizontally and
vertically so that the seals are closed on all
sides before finally tightening the top hinge.
13. Insert the hinge bracket and screw it to the
top of the unit.
14. Use a spanner to tighten it if necessary.
15. Put the hinge cover and the screw cover back.
Double check that the door is aligned
correctly and all the seals are closed
on all sides. If necessary, re-adjust the
levelling feet.
INSTALLATION
7
LFC50S_W10_IB_final110309.indd 7
09/03/2011 6:08 PM
