INSTALLATION
11
How to connect from the left side
~80cm
~90cm
110 -135cm
min. 60cm
max. 100cm
~40cm
~130cm
How to connect from the right side
Levelling the Washer Dryer
There are levelling feet on the underside. They must be adjusted to make sure the machine is
level. Use the levelling tool kit supplied.
1. On each foot, loosen the lock ring by
turning it clockwise.
2. Adjust all feet by rotating each upwards
or downwards.
3. Use a spirit level to ensure the machine is
level.
4. Tighten each lock ring by turning them
anti-clockwise (towards the machine
body).
Ensure all lock rings are tightened securely. Check that the feet are still bolted to the machine
- if they’re unbolted, the machine will move around.
Water Supply Hose
Points to remember
• Follow the instructions in this section to avoid water leaks.
• Don’t connect the hose to a combination tap.
• Don’t twist, squash, modify or cut the hose.
• This machine is designed to connect to the cold water supply. Do not connect to the hot
water supply.
• Use only the new water supply hose supplied. Old hose sets should not be reused.
Hose and Cable Lengths
LI8W6D17_IB_RC_190830_grace.indd 11
30/8/2019 6:12 PM