background image

1

SAFETY WARNINGS

WASHING MACHINE

For your continued safety and to reduce the risk of injury or electric shock, 

please follow all the safety precautions listed below.

WARNING!

•  If you will not be using the washing machine for a while such as when 

you go on holiday, disconnect the plug from the mains supply and 

turn off the water supply to the washing machine. This is particularly 

important if there is no drainage around the washing machine. 

•  If the water supply is left on, water pressure may build up and cause a 

leak.

General Use

•  Transit bolts are used to transport the washing machine. You should 

remove these using a spanner or similar tool before you install the 

washing machine. If you do not, it will cause strong vibrations when the 

washing machine is spinning.

•  Do not install your washing machine anywhere that is damp or exposed 

to the weather. If you do, it may cause an electric shock, fire, failure or 

deterioration.

•  Do not pour water directly onto any part of the washing machine. It may 

cause a short circuit or electric shock.

•  Keep burning objects such as candles or cigarettes, away from the 

washing machine. They may cause a fire or damage.

•  Keep flammable substances well away from the washing machine – for 

example kerosene, gasoline, benzene, paint thinner and alcohol, or 

clothing soaked with these. They may cause an explosion or a fire.

•  This washing machine is only suitable for washing textiles labelled 

‘washing machine washable’.

•  Do not connect the washing machine to hot water. The washing 

machine works with cold water only.

•  Before you start using the washing machine, turn the tap on to check 

that the hose is properly connected. If it’s not, there may be a water leak.

•  Do not put too much laundry or detergent into the washing machine. It 

may cause issues with the washing machine or laundry.

•  Be careful not to get your laundry caught in the door when you close it. 

This could cause a water leak or damage your laundry.

•  This washing machine is for household (domestic) use only.

IB safety_Washing Machine_UK_Final200714.indd   1

IB safety_Washing Machine_UK_Final200714.indd   1

14/7/2020   10:58 AM

14/7/2020   10:58 AM

Summary of Contents for LIW714W20


































Reviews: