Voice Recorder
Record
Setting
1.
Select
Record
in the Main menu and press PLAY button to enter.
2.
Select
Settings
and press PLAY button to enter the submenu.
3.
Press UP and DOWN
buttons to choose a record setting:
Encoder and Rate.
4.
Press PLAY button to enter the submenu and choose one option as
your current settings.
5.
Press PLAY button to confirm.
6.
Press MENU button to go back to the previous menu.
•
Start Record
1.
Select
Start Record
and press PLAY button to begin recording.
2.
Press the PLAY/PAUSE button to pause recording.
3.
Press MENU button to stop recording and back to the previous menu.
The voice record will be saved as a file named Vxxxx.WAV in the Voice folder.
Play back voice
This operation is similar to the playback of music.
1.
Select Voice in the Main Menu and press PLAY button to enter.
2.
Select a record by pressing UP
and DOWN
buttons.
3.
Press PLAY button to play back the record.
Hold Function
Use the Hold (LOCK) function to deactivate the Player controls (to avoid
accidental activation).
1.
To activate the Hold function, slide the HOLD switch to its locked
position.
2.
Slide the HOLD switch back to turn off the Hold function.
Note: A higher recording sampling frequency brings better recording quantity, but takes more
memory space.
Note that the screen will display “UI Record Error! No memory” when all available memory
has been used.
Note: The Player will not be turned on if the hold switch is in its locked position.