8
GB
2. Undo the two screws from the bottom
bracket. Remove both feet from the unit.
3. Place the two screws, the bottom bracket
and the feet to one side.
4. Slide the door down about 15cm (6”) and
off the top hinge pin. Lift it away from
the unit.
5. Remove the plastic caps from the
top of the unit. Remove the two
screws from top bracket and replace
on the other side.
6. Slide the door back on to the Top hinge,
making sure it’s the right way up. Screw
the bottom hinge into place on the new
side. Replace the other foot on the other
side.
7. Slowly and carefully place the unit on the
ground. Check that the door is aligned
horizontally and vertically and that the
seals are closed on all sides before finally
tightening the bottom hinge. Re-adjust
the levelling feet.
Remove
INSTALLATION
LTT68S10E_IB_5L_111021_ELabel.indb 8
11年10月21日 下午6:04
Summary of Contents for LTT68S10E
