INSTALLATION
8
screw
screw
8. Remove the screw-type adjustable feet from
another side of the unit bottom and transfer it
to the corresponding position on the opposite
side of the unit bottom.
9. Reattach the two lower screws, hinge bracket
and adjustable feet to the opposite side of the
unit bottom. Loosely secure.
10. Carefully set the upper door back into place.
Ensure the fridge door is aligned horizontally
and vertically so that the seals are closed on all
sides before finally tightening the top hinge.
Insert the hinge bracket and screw it to the top
of the unit.
11. Use a spanner to tighten it if necessary.
13. With the door closed, check that the door is
aligned horizontally and vertically and that
the seals are closed on all sides before finally
tightening the bottom hinge. Re-adjust the
levelling feet as needed.
12. Put the top cover back and fix it in place with
the screws.
