6
English
7
English
End-of-Life Battery Disposal Instructions
This device uses a Lithium-ion battery that should last the lifetime of the device. If you suspect your battery
may be dead, try charging it. If the battery does not recharge, please contact Logitech
®
Customer Support
for repair information.
The Logitech
®
Pure-Fi Anywhere
™
2 compact speakers for iPod do not have
a user-serviceable battery. Please do NOT attempt to change the battery yourself.
If the battery has died and
you do not want Logitech
®
to replace your battery, you should follow the disposal instructions below. Consult local laws
and regulations for proper battery disposal in your region. If there are no local regulations concerning battery disposal,
please dispose of the device in a waste bin for electronic devices.
Caution
The battery used in this device may present a risk of fire, explosion or chemical burn
if mistreated.
Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. Do not expose battery to heat above 60° C (140°F), or incinerate.
Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged
or unused for extended periods of time. When batteries are misused, they may explode or leak, causing burns and personal injury. If your battery leaks,
use normal precaution and discard the battery immediately.
Getting the Most Out
of Your Speakers
1. Using the travel case
The AC adapter is designed to fit into the iPod dock.
To avoid damaging the iPod connector, insert the AC
adapter as shown – with the cable at the top.
2. Navigating the iPod menus
The remote control includes buttons to navigate
the menus on the iPod. The arrow keys are used
to scroll through the menu. The ‘menu’ key goes
to the previous menu, and the ‘select’ key goes to
the next menu.
3. Adjusting shuffle and repeat
Both the speakers and the remote include buttons
to adjust the shuffle (
) and repeat (
) states on
the iPod.
4. Stereo
XL
Logitech
®
Pure-Fi Anywhere
™
2 includes a proprietary
“Stereo XL” feature that dramatically widens the sound
field. To turn Stereo XL on and off, use the button on
the remote.
1. Pry off front cover.
2. Use Philips screwdriver to remove 8 screws as shown.
3. Pull speakers apart.
4. Disconnect battery connector.
5. Use Philips screwdriver to remove 2 screws as shown.
6. Do not place in trash. Dispose of battery according
to local battery recycling laws.
Recycling Information for Lithium-ion Battery: Battery Removal
Caution:
Use safety goggles when disassembling your Pure-Fi Anywhere
™
Remote Control – User-Replaceable Battery
Caution:
Remote control contains a user-replaceable lithium battery.
Danger of fire or explosion if battery is incorrectly replaced. Replace only with CR2025 3V lithium button cell replacement battery. Dispose of used
batteries promptly according to the user instructions, following local recycling or waste regulations.
Warning:
Risk of fire, explosion, and burns. Do not disassemble, crush, or incinerate. Battery shall not be exposed to excessive heat such as sunshine,
fire, or the like. Keep battery out of reach of children and in original package until ready for use. Never put batteries in mouth.
If swallowed, contact your physician or local poison control center.
620-000942 Pure-Fi Anywhere2-QSG_EMEA.indd 6-7
620-000942 Pure-Fi Anywhere2-QSG_EMEA.indd 6-7
22.4.2008 17:42:26
22.4.2008 17:42:26
