6
A
Lo
ng
,
62
0
- 9
50
S
ho
rt,
6
20
-
87
0
Lo
ng
,
42
5
- 7
15
S
ho
rt,
3
85
-
63
5
Lo
ng
,
62
0
- 9
50
S
ho
rt,
6
20
-
87
0
Lo
ng
,
42
5
- 7
15
S
ho
rt,
3
85
-
63
5
Box holder with clamps
– upper position
Box holder with clamps
– lower position
2.1 Box holder
The Rotator can be equipped with one or two sets of box holders,
adjusted for different box sizes. When loosening the screw (A),
the box holder can be moved between the two different positions.
NOTE!
The screw has to be tightened, before using the product.
Adjusting the distance
•
Fork span 560 mm:
Distance between box holders of 840, 890, 1000 or
1040 mm, for box widths of 800, 850, 950 or 1000 mm.
•
Fork span 680 mm:
Distance between box holders of 1040, 1090, 1200 or
1240 mm, for box widths of 1000, 1050, 1150 or 1200 mm.
Setting of height
The box holders can be placed in two different heights
•
It is important that the box holders are placed approx. on the level of or above
the load centre of the load.
•
Use two box holders in each side:
1) When the weight of the load is between 500 and 1000 kg.
2) For high boxes or when the material of the box is unstable, e.g. cardboard
NOTE!
If the box holders have no clamps, the load is not allowed to be tilted more
than 60º to each side.
2.2 Box holders with clamps
If the box can fall off, or if it has to be tilted more than 60º, box holders with clamps
have to be used.
Box holders with clamps can grip, hold and rotate boxes with different heights.
The clamps are to be tightened when the box is lifted from the floor.
2.0 Functions and identifications
Summary of Contents for LOGIFLEX SELFR 1001/1600
Page 1: ...LOGIFLEX ROTATOR SELFR SELFSR ...
Page 9: ...9 1 3 0 How to operate the Rotator 3 3 Handle functions ...
Page 31: ...31 ...
