P·11
OFF-BOARD CHARGER
Take out the battery of its slot, you can charge it with the off-board charger through a
3-pin charger socket inside the battery box.
MODE LEVER
There is a mode lever at the lower right of the seat base, shown in fig.1. Whenever you do
not want to move your scooter with the motor, you can put it in manual mode.
Push the manual mode lever to disengage the drive motor (manual mode).
Push backward on the manual mode lever to reengage the drive motor (drive mode).
• When your scooter is in manual mode, the brake system is disengaged. In this case, the
control system will automatically cut off the forward or backward function.
• Never sit on your scooter when it is in manual mode.
• Never put your scooter in manual mode on an incline. Failure to do so may cause
personal injury.
WARNING! When your scooter is in drive mode, the mode lever must
be pulled backward, i.e. in drive mode, so as to guarantee the brake
system works normally. Failure to do so may cause personal injury or
damage to the scooter.
PIN CHARGER SOCKET(SEE FIG.6)
This socket is used to connect the off-board charger. When charging, this socket stops your
scooter from moving.
WARNING!
Incorrect connection may cause damage to the charger, connectors and
circuits.
